Angle Seat Valve
Applications
JZ5 angle seat valve is a pneumatic valve. It is widely used in food and chemical processes, sterilization machines, high pressure sterilizers, dry-cleaning machines, clothes dryers and beer equipment, especially in steam piping systems and production lines.
Operating Principle
The operating principle of JZ5 angle seat valve is the same as the check valve. However, the Y-shaped valve body equipped with pneumatic actuator expands the flow cross section of the valve chamber. This makes the fluid steadier and increases the flow rate by 30%. Meanwhile, the flow direction of medium is changed, and smaller pneumatic actuator can be equipped.
Technical Data
| Metal material | Product wetted | 316L (DIN-1.4404) |
|---|---|---|
| Non-product wetted | 304 (DIN-1.4301) | |
| We can provide EN 10204 3.1B certificate. | ||
| Seal material | Standard | PTFE |
| Options | FPM, Silicone, EPDM | |
| All seal materials comply with FDA 177.2600. | ||
| Temperature | Working temperature | -50°C ~ +180°C (PTFE) |
| Working pressure | 0~16bar | |
| Pressure | Control air pressure | 5~8bar |
| Surface treatment | Internal surface | Ra≤0.8µm |
| External surface | Matte | |
| Connection | Connection methods: welding, thread, clamp, flange | |
Applications
JZ5 angle seat valve is a pneumatic valve. It is widely used in food and chemical processes, sterilization machines, high pressure sterilizers, dry-cleaning machines, clothes dryers and beer equipment, especially in steam piping systems and production lines.
Operating Principle
The operating principle of JZ5 angle seat valve is the same as the check valve. However, the Y-shaped valve body equipped with pneumatic actuator expands the flow cross section of the valve chamber. This makes the fluid steadier and increases the flow rate by 30%. Meanwhile, the flow direction of medium is changed, and smaller pneumatic actuator can be equipped.
Technical Data
| Metal material | Product wetted | 316L (DIN-1.4404) |
|---|---|---|
| Non-product wetted | 304 (DIN-1.4301) | |
| We can provide EN 10204 3.1B certificate. | ||
| Seal material | Standard | PTFE |
| Options | FPM, Silicone, EPDM | |
| All seal materials comply with FDA 177.2600. | ||
| Temperature | Working temperature | -50°C ~ +180°C (PTFE) |
| Working pressure | 0~16bar | |
| Pressure | Control air pressure | 5~8bar |
| Surface treatment | Internal surface | Ra≤0.8µm |
| External surface | Matte | |
| Connection | Connection methods: welding, thread, clamp, flange | |
Dimensions (mm)
| Size ΦD |
Bore (mm) |
Actuator (mm) |
A | B | C | E | F | H | SW |
|---|---|---|---|---|---|---|---|---|---|
| G1/2 G3/4 |
13 20 |
50 50 |
85 95 |
173 178 |
12 12 |
64 64 |
44 44 |
137 145 |
27 32 |
| G1 G1-1/4 |
25 32 |
63 63 |
105 120 |
212 255 |
14 16 |
80 101 |
52 60 |
173 210 |
41 50 |
| G1-1/2 G2 |
40 50 |
63 80 |
130 150 |
301 346 |
18 20 |
127 153 |
73 86 |
260 301 |
55 70 |
| G2-1/2 | 65 | 80 | 185 | 372 | 22 | 153 | 86 | 315 | 70 |
Dimensions (mm)
| Size ΦD |
Bore (mm) |
KV (m3/h) |
Working pressure (bar) |
Control air pressure (bar) |
Actuator (mm) |
Flow direction | NC/NO |
|---|---|---|---|---|---|---|---|
| G3/8 G1/2 |
13.0 13.0 |
3.7 4.2 |
0-16 0-16 |
4.0 2.7 |
40 50 |
Above the seat Above the seat |
 |
| G3/4 G1 |
20.0 25.0 |
8.0 19.0 |
0-16 0-16 |
2.7 2.0 |
50 63 |
Above the seat Above the seat | |
| G1 1/4 G1 1/2 |
32.0 40.0 |
27.5 42.0 |
0-16 0-16 |
2.0 2.0 |
63 63 |
Above the seat Above the seat | |
| G2 G2 1/2 |
50.0 65.0 |
52.0 77.0 |
0-16 0-14 |
2.0 1.6 |
63 80 |
Above the seat Above the seat |
Fuel Tank Manhole,Bottom Valve,Api Adaptor,Vapor Vents,Fuel Tank Accessories,overfill sensor,api dust cap